21A-28
MANUAL GEARBOX
Output shaft: Removal - Refitting
JAX, and JA3 – JHX, and JH3
21A
Remove:
- the second gear sprocket (9)
- the splined washer (10) .
Remove:
- the lock ring (11) and fit a new one in every case,
- the first/second gear selector rod hub (12) .
- the first gear sprocket (13) .
REFITTING
Proceed in the reverse order to remove.
Oil the synchroniser rings.
114312
114311
Note:
The lock rings must be systematically replaced.
100410
WARNING
Make sure that the notches on the double cone
synchroniser are correctly positioned.
Kommentare zu diesen Handbüchern