2.19
ENG_UD21041_2
Système de surveillance de pression des pneumatiques (L43 GOM3/EURO - Renault)ENG_NU_949-3_L43_Renault_2
If you wish to swap the wheels around,
you consult an approved dealer
to reinitialise the system.
To mark the correct position of the
wheel, note the colour of ring 4 (after
cleaning, if necessary) on each valve:
A yellow ring
B black ring
C red ring
D green ring
Each of the sensors incor-
porated in the valves 3 is
dedicated to a single wheel:
under no circumstances
should you swap the wheels, with-
out resetting the system.
There is a risk of incorrect informa-
tion which could have serious con-
sequences.
The emergency spare wheel has no
sensor and cannot therefore be de-
tected by the system.
When it is fitted to the vehicle, the mes-
sage “Tyre pressure sensors absent” is
displayed on the instrument panel.
This operation requires specific equip-
ment (wheels, tyres, wheel trims, etc.).
Consult an approved dealer to fit new
tyres. The use of any other accessory
may prevent the system from operating
correctly.
Because the sensors built into the
valves are specially designed, use only
products approved by our Technical
Department.
There are some precautions which
must be taken. Consult an approved
dealer.
Kommentare zu diesen Handbüchern